We are the best supplier of Control Panels.
There are Jalganga control panels available for submerged pump sets that are single or three phase. Capacitors for beginning and running are found in panels. While running capacitors guarantee smooth motor operations, starting capacitors supply the torque needed to start the motor. Depending on the motor rating, a range of start and run capacitors is offered. A voltage tester is also included for monitoring the input voltage.
We Provides below categories of Control Panels :
MONO
Features :
- Over Load Protection
- On Off by MCB
Specifications :
- Voltage : 120 to 250 Volts A.C
- H.P : 0.5 to 3.0 H.P
MCBWS
Features :
- Over Load Protection
- On Off by MCB
- With AMP and Volt Meter
Specifications :
- Voltage : 120 to 250 Volts A.C
- H.P : 0.5 to 3.0 H.P
MCBWS (DIGI)
Features :
- Over Load Protection
- On Off by MCB
- With AMP and Volt Meter Digital
Specifications :
- Voltage : 120 to 250 Volts A.C
- H.P : 0.5 to 3.0 H.P
O/F (DIGI)
Features :
- Over Load Protection
- On Off by MCB
- With AMP and Volt Meter Digital
Specifications :
- Voltage : 120 to 250 Volts A.C
- H.P : 0.5 to 3.0 H.P
CH+OLP
Features :
- Over Load Protection
- With AMP and Volt Meter
Specifications :
- Voltage : 120 to 250 Volts A.C
- H.P : 0.5 to 2.0 H.P
CH+MCB
Features :
- Over Load Protection
- On Off by MCB
- With AMP and Volt Meter
Specifications :
- Voltage : 120 to 250 Volts A.C
- H.P : 0.5 to 3.0 H.P
1P+OLP (DIGI)
Features :
- Over Load Protection
- With AMP and Volt Meter Digital
Specifications :
- Voltage : 120 to 250 Volts A.C
- H.P : 0.5 to 2.0 H.P
2P+MCB (DIGI)
Features :
- Over Load Protection
- With AMP and Volt Meter Digital
Specifications :
- Voltage : 120 to 250 Volts A.C
- H.P : 0.5 to 10.0 H.P
DOL-AUTO
Features :
- Over Load Protection
- On Delay Timer(Auto)
Specifications :
- Voltage : 200 to 450 Volts A.C (Three Phase)
- H.P : 0.5 to 10.0 H.P
PEG-6
Features :
- Over Load Protection
- On Delay Timer(Auto)
- Amp + Volt Meter (Dual)
- Mkl Type Contector & Relay
Specifications :
- Voltage : 200 to 450 Volts A.C (Three Phase)
- H.P : 0.5 to 6.0 H.P
PEG-10
Features :
- Over Load Protection
- On Delay Timer(Auto)
- Amp + Volt Meter (Dual)
- MU Type Contector & Relay
Specifications :
- Voltage : 200 to 450 Volts A.C (Three Phase)
- H.P : 0.5 to 20.0 H.P
PEG-20
Features :
- Over Load Protection
- On Delay Timer(Auto)
- Amp + Volt Meter (Dual)
- MU Type Contector & Relay
Specifications :
- Voltage : 200 to 450 Volts A.C (Three Phase)
- H.P : 10.0 to 30.0 H.P
PEG-20(IP)
Features :
- Over Load Protection
- On Delay Timer(Auto)
- Amp + Volt Meter (Dual)
- MU Type Contector & Relay
- Dry Run Protection
Specifications :
- Voltage : 200 to 450 Volts A.C (Three Phase)
- H.P : 10.0 to 30.0 H.P
KP-SOLAR
Specifications :
- Voltage : As Per Customer Required
- H.P : 0.5 to 7.5 H.P
- Input Voltage : D C
- Output Voltage : A C
KP-APFC
Features :
- Automatic Power Factor Protection
Specifications :
- Voltage : 200 to 450 Volts A.C (Three Phase)
- Range : 3 Kvar to 300 Kvar
KP-ATS
Features :
- Over load Protection
- With AMP and Volt Meter
- Auto Transformer
Specifications :
- Voltage : 200 to 450 Volts A.C (Three Phase)
- H.P : 30.0 H.P to 300.0 H.P
1P+DRYRUN
Features :
- Digital Amp + Volt Meter
- Over Load Protection
- Under Load Protection (Dryrun)
- High Voltage Protection
- Low Voltage Protection
Specifications :
- Voltage : 120 to 250 Volts A.C
- H.P : 0.5 H.P to 5.0 H.P
3P+DRYRUN
Features :
- Digital Amp + Volt Meter
- Over Load Protection
- Under Load Protection (Dryrun)
- High Voltage Protection
- Low Voltage Protection
Specifications :
- Voltage : 200 to 450 Volts A.C
- H.P : 0.5 H.P to 7.5 H.P
DIGITAL AMP & VOLT METER
Specifications :
- Amp : 0.0 To 100.0 Amp & 0.0 To 25.0 Amp
- Volt : 0.0 To 250.0 volt & 0.0 To 450.0 volt
DIGITAL DRYRUN METER
Features :
- Over Load
- Under Load
- High Voltage
- Low Voltage
Specifications :
- Amp : 4.0 To 20.0 & 10.0 To 60.0 Amp
- Volt : 0.0 To 250 Volt & 0.0 To 450.0 Volt
